Page 1 of 1
FaxLine: can not receive; NG error at TX
Posted: Wed Dec 12, 2012 8:33 pm
by smaximov
Hi,
Several attempts to receive a fax on my FaxLine number were not successful. TX fax reported error "NG".
Stas.
Re: FaxLine: can not receive; NG error at TX
Posted: Thu Dec 13, 2012 9:43 am
by smaximov
Today's attempt at 9:49am was somewhat more productive: tried sending two pages to FaxLine, only the 2nd page was received and it was received severely corrupted. TX fax reported the same error: "NG".
I can not attach the received PDF to this message, but can forward to email you specify.
Could you please investigate the problem? Please let me know if you need additional information or have any suggestions for me to try.
Stas.
Re: FaxLine: can not receive; NG error at TX
Posted: Thu Dec 13, 2012 9:57 am
by smaximov
Another attempt at 9:53am, now to TX 4 page document resulted in 3 pages received, all 3 pages are corrupted very significantly. Please let me know if you would like me to forward received PDFs for investigation.
Stas.
Re: FaxLine: can not receive; NG error at TX
Posted: Thu Dec 13, 2012 5:01 pm
by kgc
Stas - do you know what kind of fax machine/phone line was used to send the faxes?
Re: FaxLine: can not receive; NG error at TX
Posted: Thu Dec 13, 2012 5:49 pm
by smaximov
kgc wrote:Stas - do you know what kind of fax machine/phone line was used to send the faxes?
1. Canon ImageRunner 5050
2. PSTN/Pacbell
Re: FaxLine: can not receive; NG error at TX
Posted: Mon Dec 17, 2012 9:33 am
by smaximov
Another attempt to receive fax at 9:22am Dec, 17: Out of 4 pages, only pages 1,4 were received (corrupted). Pages 2,3 are missing completely. Please see my FaxLine log for more details. If necessary, I can forward all the emails from FaxLine with the attached PDFs.
Stas.