Page 2 of 2
Re: Pace 4111n "Features"
Posted: Thu Nov 29, 2012 8:39 am
by dane
digitalbitstream wrote:I drilled two holes in the base, and screwed the base to a surface. Then slid the modem in.
When it comes time to return it to sonic, I'll just fill the holes with putty. And hope Dane never reads this and blacklists my account.
Re: Pace 4111n "Features"
Posted: Wed Dec 12, 2012 9:03 pm
by EdwardCarroll
If the base is removable you can mount it the way I mounted my 2-Wire. Use four plastic mirror clips, four flat-head screws and four pieces of Tygon tubing (or other spacer) to cover the screws. Mount it upright and flat to a wood surface. All of this is available at your local hardware store.
There is no need to modify the unit in any way.
My house has wiring to one phone in the front entry on the first floor... period. That's what you got in 1905, along with the coal stove in the kitchen for heat. So I have a splitter, a wireless modem and a DECT6 telephone there. And an extension cord for the wall warts to a socket a foot too far away. I also have renovation plans... ($$$$$)