Sonic.net Forums
https://forums.sonic.net/
Yeah we get it. You're leet and have a one-of-a-kind setup...ryanca wrote:I had to use my modem (which was very difficult to find) for physical connectivity as well as the AT&T 2wire CPE so that the AT&T hardware could do 802.1x auth. It's highly impractical to set up, but it does avoid going through their lousy NAT.
Yeah, I got the 5168N last week, but hadn't connected it because I knew that the second pair wasn't physically connected at the MPOE or my phone jack. I got a call from support and they wanted me to try it anyway despite me telling them this. I didn't get a clear answer why, but it seemed like the goal was to verify I (a customer with unknown technical competence - I worked in IT for a decade, I understand) was correct and a truck roll was actually required. They stayed on the phone with me until I was online in bridge mode again, but they seemed surprised that my other modem didn't work after the X2 config was activated.dane wrote:We did send it and you did receive it? It's supposed to arrive before the X2 config kicks in, and it supports not bonded and single line, so as long as you swap that in as soon as you get it, there will be not interruption.
To the best of my knowledge, I am the only person to have ever gotten this to work reliably. I wrote up some of the details on DSLReports if you're interested.Guest wrote:Yeah we get it. You're leet and have a one-of-a-kind setup...ryanca wrote:I had to use my modem (which was very difficult to find) for physical connectivity as well as the AT&T 2wire CPE so that the AT&T hardware could do 802.1x auth. It's highly impractical to set up, but it does avoid going through their lousy NAT.
Thanks. I appreciate the info. You're still leet for having the setup working and sharing.ryanca wrote:To the best of my knowledge, I am the only person to have ever gotten this to work reliably. I wrote up some of the details on DSLReports if you're interested.
http://www.dslreports.com/forum/r265230 ... DSL2-modem
I actually ended up buying the necessary VDSL2 modem from the guy who posted this other thread because I couldn't find anywhere online to buy one from.
http://www.dslreports.com/forum/r224238 ... VDSL-modem
Not likely to work - I don't think you can even get to the firmware upgrade screen without a maintenance password.Guest wrote:Possibility of picking up ATT U-Verse modem and reflashing it with Sonic provisioning?
So what DO you recommend?dane wrote:I wouldn't recommend that Zhone unit, it doesn't support PTM, nor VDSL2 nor does it offer WiFi that's fast enough for a what a bonded connection can deliver. A minimum of 802.11N 2x2 400mw is suggested.
I recommend members use the equipment we supply. YMMV with anything else.digitalbitstream wrote:So what DO you recommend?dane wrote:I wouldn't recommend that Zhone unit, it doesn't support PTM, nor VDSL2 nor does it offer WiFi that's fast enough for a what a bonded connection can deliver. A minimum of 802.11N 2x2 400mw is suggested.
The current Sonic policy is a recipe for having a dozen crazy different types of equipment on the network.
You speak with a forked tongue. On one side of the tongue customers can "bring their own equipment",dane wrote:I recommend members use the equipment we supply. YMMV with anything else.
That's not what he said at all. They can't guarantee user supplied equipment will work as intended, which makes sense with all the different equipment that is out there and how difficult it can be to configure some modems to work.digitalbitstream wrote:You speak with a forked tongue. On one side of the tongue customers can "bring their own equipment",dane wrote:I recommend members use the equipment we supply. YMMV with anything else.
on the other side they really can't.