IPv6 with Sonic ONT

Internet access discussion, including Fusion, IP Broadband, and Gigabit Fiber!
166 posts Page 17 of 17
by aanon4 » Mon Sep 02, 2024 5:00 pm
Just rummaging through some old posts and I see IPv6 was "coming soon" back in 2018. I know some bits of Sonic's fiber network have it now, but the rest of us would like it too. Any updates?
by brandonc » Mon Sep 02, 2024 5:02 pm
pshipley wrote: Mon Sep 02, 2024 4:50 pm
timothyzhu wrote: Fri Nov 03, 2023 1:40 pm Also in Berkeley and do not see IPv6 enabled yet
Same here.. (Downtown/West Berkeley) :(
Hi there, sorry to hear you're having problems getting a IPv6 address. Just to clarify, the comment your replied to is from last year when we were still working on rolling this out for testing purposes. However, native IPv6 is enabled for all our 1gbps and 10gbps Fiber customers (except for LA currently), so you should be able to grab an address if your router is configured for IPv6.

You can see here another Berkeley user commented earlier on this thread in January about finally having access to IPv6
tigertech wrote: Fri Jan 12, 2024 9:30 am Since I've been complaining about this for years, I thought I'd say "thanks": as of yesterday, I now have native IPv6, with a /56 prefix, in Berkeley. Finally I can say goodbye to tunnels.

Thank you Sonic!
If you're having issues, please post what router you're using and what steps you've taken so far, so that another user familiar with your router can try giving you some tips on what to try. There's also a chance the router you're using doesn't support IPv6, but I'm unable to see what router you're using, so can't say for certain.

I hope this helps.

Kind regards,
Brandon C.
Community and Escalations
Sonic
by aanon4 » Mon Sep 02, 2024 5:27 pm
Well this is good news.
My firewall is a virtualized Mikrotik CHR, so I tried the configuration recommended here - posting.php?mode=quote&p=63643 - but without any luck.
by aanon4 » Mon Sep 02, 2024 6:08 pm
One thing worth adding - this setup has no trouble getting an IPv6 from Starlink.
by jfa_roy » Mon Sep 02, 2024 8:33 pm
aanon4 wrote: Mon Sep 02, 2024 5:27 pm Well this is good news.
My firewall is a virtualized Mikrotik CHR, so I tried the configuration recommended here - posting.php?mode=quote&p=63643 - but without any luck.
Get in touch with customer support. There are settings on their equipment that only they can inspect that may be breaking you. The MAC table comes to mind.
by pshipley » Fri Sep 13, 2024 1:10 am
jfa_roy wrote: Mon Sep 02, 2024 8:33 pm
aanon4 wrote: Mon Sep 02, 2024 5:27 pm Well this is good news.
My firewall is a virtualized Mikrotik CHR, so I tried the configuration recommended here - posting.php?mode=quote&p=63643 - but without any luck.
Get in touch with customer support. There are settings on their equipment that only they can inspect that may be breaking you. The MAC table comes to mind.
Will do, I'm also seeing other problems,
I attached the switch to the ONT so i can connect a rpi and a macbook, neither can obtain an address IP4 or IP4

When I ran TCPdump on the pi I can unanswered DHCP Requests as well as ICMP6, neighbor solicitations .
166 posts Page 17 of 17

Who is online

In total there are 3 users online :: 1 registered, 0 hidden and 2 guests (based on users active over the past 5 minutes)
Most users ever online was 2877 on Wed Sep 25, 2024 9:53 pm

Users browsing this forum: Semrush [Bot] and 2 guests