dead link on "Fusion IPv6 Tool" page

Advanced feature discussion, beta programs and unsupported "Labs" features.
5 posts Page 1 of 1
by michael » Fri Sep 06, 2024 6:34 pm
On https://help.sonic.com/hc/en-us/article ... -IPv6-Tool the link https://members.sonic.net/connections/fusion/ipv6/ goes nowhere special.

I was trying to understand what my IPv6 configuration is from the Sonic side, since I'm doubting that I got it set up correctly on my side. I use my modem in a bridge mode, all setup is on my servers instead. Where can I find this?
Sonic customer since 2003
by brandonc » Mon Sep 09, 2024 9:27 am
michael wrote: Fri Sep 06, 2024 6:34 pm On https://help.sonic.com/hc/en-us/article ... -IPv6-Tool the link https://members.sonic.net/connections/fusion/ipv6/ goes nowhere special.

I was trying to understand what my IPv6 configuration is from the Sonic side, since I'm doubting that I got it set up correctly on my side. I use my modem in a bridge mode, all setup is on my servers instead. Where can I find this?
Hi Michael,

I'm sorry about the dead link. We appreciate you bringing that to our attention, so that we could edit it to the correct link. I have updated the wiki page to display the correct link in Member Tools, which is https://members.sonic.net/labs/ipv6tunnel/

I hope this helps!

Kind regards,
Brandon C.
Community and Escalations
Sonic
by michael » Mon Sep 09, 2024 12:45 pm
brandonc wrote:
michael wrote: Fri Sep 06, 2024 6:34 pm I was trying to understand what my IPv6 configuration is from the Sonic side, since I'm doubting that I got it set up correctly on my side. I use my modem in a bridge mode, all setup is on my servers instead. Where can I find this?
I have updated the wiki page to display the correct link
OK, thanks @brandonc, that solves part of the mystery. The other part is that when I click the "View/Request Tunnel" button, it prints:

Code: Select all

Transport:: 2001:05a8:0000:0001:0000:0000:0000:____/127
Network:: 2001:05a8:____:___0:0000:0000:0000:0000/60
(IDK how much of that is private.)

The addresses that I have configured currently, from several years ago, for 6RD are like 2602:244:624e:....
  • Did something change? addresses, maybe?
  • Is the technology different? because the iproute2 commands look similar, still looks like 6RD, but I don't understand the old "sixbone" reference.
Also, the content on https://help.sonic.com/hc/en-us/article ... -IPv6-Tool looks nothing like the https://members.sonic.net/labs/ipv6tunnel/ page that it references. It does, though, make reference to "6in4 tunneling", which links to a page whose content does match what I'm seeing.

So is the technology you're using 6in4 aka SIT, not 6RD? If so, idk how I got so confused years ago.
Sonic customer since 2003
by michael » Mon Sep 09, 2024 1:20 pm
I was poking around this subject in 2021: viewtopic.php?t=17001

Back then, I set up commands like this:

Code: Select all

ip tunnel add 6rd-0 mode sit local __.__.__.__ ttl 64
ip tunnel 6rd dev 6rd-0 6rd-prefix 2602:240::/28
ip addr add 2602:244:____:___0::1/28 dev 6rd-0
ip link set 6rd-0 up
ip route add ::/0 via ::184.23.144.1 dev 6rd-0
Sonic customer since 2003
by kgc » Tue Sep 10, 2024 9:36 am
There's three ways we provide v6. First, is the old legacy tunnel services which still has some utility, but primarily is still around because we don't like turning things down which are in use, even by few customers. Second, is via 6rd (this is also deprecated) but still functional if you configure it manually on your end - this was primarily setup to deliver v6 services to customers on our legacy copper xDSL services. Third, native. Anyone enterprise customer or end user on our fiber network should avail themselves with native v6 services.
Kelsey Cummings
System Architect, Sonic.net, Inc.
5 posts Page 1 of 1

Who is online

In total there are 4 users online :: 1 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 2877 on Wed Sep 25, 2024 9:53 pm

Users browsing this forum: Google [Bot] and 3 guests