Phone Not Working (Fusion Fiber), Immediate Busy Signal

Fusion Voice service, features and help.
2 posts Page 1 of 1
by cdellin » Wed Oct 13, 2021 7:27 pm
I had an interesting failure with my phone service (through Fusion Fiber).

I had not used my phone service in a while (many months). When I went to use it again, I found that I was unable to place outbound calls, or to receive inbound calls. Upon lifting the phone from the hook, I would hear a dialtone just fine (and the "voice" light on my ONT would glow amber as expected). But as soon as I pressed any number (0-9), it would immediately begin giving a busy signal.

In the end, after contacting Sonic support this evening, we were able to "fix" the issue by simply power cycling the ONT. As far as I know, the ONT hadn't been power cycled for many months.

I'm not sure how my ONT (an Adtran 411) got into this state. (By the way, the Ethernet connection was working just fine.) I'm hoping it's an isolated incident. I'm posting this report (a) in case anyone else runs across this problem and is looking for a quick fix, and (b) in case others have experienced something like this.

- Chris
by ngufra » Thu Oct 14, 2021 8:41 am
Yes turn it off and on again is the first thing to try.
2 posts Page 1 of 1

Who is online

In total there are 3 users online :: 0 registered, 0 hidden and 3 guests (based on users active over the past 5 minutes)
Most users ever online was 999 on Mon May 10, 2021 1:02 am

Users browsing this forum: No registered users and 3 guests