by davbrown2 » Sat May 05, 2018 3:30 pm
This is somewhat related to my previous inquiry about IPSec support in SmartRG SR515ac (I see that the VPN support allows you to restrict VPN to a particular IP address or subnet, but being able to use an entirely different network would be preferable)

In the LAN setup, I see:
Configure the second IP address and subnet mask for LAN interface

Anyone using this? I'm guessing that I would need to use static IP addresses for any clients, since the DHCP server on the router would be giving out addresses in the wrong range, and if I was to add another DHCP server to the LAN, there would be IP range confusion (unless there is VLAN support in the switch part of the router)?