I have one computer plugged directly into the SmartRG. When I do any speed test to the WAN on that machine I get ~800-900+ Mbit up and down.
I have a couple other machines plugged into a DLink DGS-1024D Gbit switch that then goes into the SmartRG. Those machines all get ~80-90Mbit when doing speed tests.. If I plug any of those machines directly into the SmartRG they get 800-900Mbit up and down.
If I try and copy files locally between ComputerA->SmartRG->DLink->ComputerB the I get about 11 MB/sec.
If I try and copy the same files between the same machines via ComputerA->DLink->ComputerB I get about 100-110 MB/sec.
It's almost as though the DLink Gbit switch negotiates with the SmartRG at 100Mbit...
Is this likely an incompatibility between the Dlink switch and SmartRG ? I think I have the latest firmware in both..
I have a couple other machines plugged into a DLink DGS-1024D Gbit switch that then goes into the SmartRG. Those machines all get ~80-90Mbit when doing speed tests.. If I plug any of those machines directly into the SmartRG they get 800-900Mbit up and down.
If I try and copy files locally between ComputerA->SmartRG->DLink->ComputerB the I get about 11 MB/sec.
If I try and copy the same files between the same machines via ComputerA->DLink->ComputerB I get about 100-110 MB/sec.
It's almost as though the DLink Gbit switch negotiates with the SmartRG at 100Mbit...
Is this likely an incompatibility between the Dlink switch and SmartRG ? I think I have the latest firmware in both..