Hi,
I'm trying to set up a port forward so that I can VPN into my network, but I can only access the OpenVPN server on the local network (192.168.X.X).
The OpenVPN server is on an Odroid XU running DietPi. I installed the OpenVPN server using the PiVPN option in DietPi.
The Odroid is hardwired to SMART RG router via ethernet.
Using THIS previous post I I entered the following in the Advanced Setup > NAT > Virtual Servers Menu
User Interface: IPOE_eth4/eth4.1
Service Name: Custom Service: "OpenVPN"
Server IP Address: 192.168.X.#
External Port Start: 1194
External Port End: 1194
Protocol: UDP
Internal Port Start: 1194
I reboot the router and the Odroid, but I can't connect from outside my network.
I've done this before on another ISP using my own router running Tomato and it works with all the same hardware (the Odroid and my Laptop/Phone).
What am I missing?
Thank you for the help!
I'm trying to set up a port forward so that I can VPN into my network, but I can only access the OpenVPN server on the local network (192.168.X.X).
The OpenVPN server is on an Odroid XU running DietPi. I installed the OpenVPN server using the PiVPN option in DietPi.
The Odroid is hardwired to SMART RG router via ethernet.
Using THIS previous post I I entered the following in the Advanced Setup > NAT > Virtual Servers Menu
User Interface: IPOE_eth4/eth4.1
Service Name: Custom Service: "OpenVPN"
Server IP Address: 192.168.X.#
External Port Start: 1194
External Port End: 1194
Protocol: UDP
Internal Port Start: 1194
I reboot the router and the Odroid, but I can't connect from outside my network.
I've done this before on another ISP using my own router running Tomato and it works with all the same hardware (the Odroid and my Laptop/Phone).
What am I missing?
Thank you for the help!