SmartRG AC - Release WAN IP or LAN Subports?
Posted: Sun Sep 22, 2019 9:36 pm
Anyone know how to release the WAN IP on SmartRG SR516ac?
Edit: Or how to configure the ability for LAN Subports like the Pace? Essentially, I want to be able to allow certain ethernet connected devices to have their WAN IPs.
I couldn't see how to do it on the admin console.
Hard and soft rebooting got me the same WAN IP again.
Also, SSH'ing in I couldn't use dhcpclient.
FYI - here are the list of commands I found.
...
help
logout
exit
quit
reboot
adsl
xdslctl
xtm
brctl
cat
virtualserver
ddns
df
loglevel
logdest
dumpcfg
dumpmdm
dumpeid
mdm
https
meminfo
kill
dumpsysinfo
exitOnIdle
dnsproxy
syslog
echo
ifconfig
ping
ps
pwd
seclog
sntp
sysinfo
tftp
traceroute
wlctl
wifibutton
arp
defaultgateway
dhcpserver
dns
lan
lanhosts
passwd
ppp
restoredefault
savedefault
cleardefault
route
save
swversion
keyteston
keytestoff
allledon
allredledon
allledoff
resetethled
showconfigmode
usb1test
usb2test
uptime
cfgupdate
swupdate
wan
mcpctl
Pha
tr69cfg
modelname
configorigin
Edit: Or how to configure the ability for LAN Subports like the Pace? Essentially, I want to be able to allow certain ethernet connected devices to have their WAN IPs.
I couldn't see how to do it on the admin console.
Hard and soft rebooting got me the same WAN IP again.
Also, SSH'ing in I couldn't use dhcpclient.
FYI - here are the list of commands I found.
...
help
logout
exit
quit
reboot
adsl
xdslctl
xtm
brctl
cat
virtualserver
ddns
df
loglevel
logdest
dumpcfg
dumpmdm
dumpeid
mdm
https
meminfo
kill
dumpsysinfo
exitOnIdle
dnsproxy
syslog
echo
ifconfig
ping
ps
pwd
seclog
sntp
sysinfo
tftp
traceroute
wlctl
wifibutton
arp
defaultgateway
dhcpserver
dns
lan
lanhosts
passwd
ppp
restoredefault
savedefault
cleardefault
route
save
swversion
keyteston
keytestoff
allledon
allredledon
allledoff
resetethled
showconfigmode
usb1test
usb2test
uptime
cfgupdate
swupdate
wan
mcpctl
Pha
tr69cfg
modelname
configorigin